The Supply Source French Dip System

You can provide a fantastic sleek look to your nail tips as well as your natural nails with The Supply Source French Dip System.

The first step is to prepare your nails. Size your nail tips. Keep a little margin while sizing. Now lay the nails in the order in which you will be applying the system.

The next step is to use Supply Source Brush on Resin and base the nails. You should cover the entire nail but leave 1/16' to 1/18' space from cuticles and sidewalls. Keep the tip on the nail and hold it till it dries. You can also go for Supply Source Activator to create a quick perfect adhesion.

Now turn the tip of one of the nail and cautiously put the Supply Source Resin on the inner smile line. Now place it on our natural nail and hold it for about ten seconds so that it firmly grips your nail. Repeat the procedure for the rest three fingers of your hand followed by the two thumbs and then for the four fingers of your other hand.

The next step is to cut the tips and measure the nail length. Give your nail the final shape and remove the shine from the tips using a 180/180 grit cushion board file. Be careful not to touch the smile line. Use a clean dry nylon nail brush to remove the dust. If you have chosen to use glue activator earlier then you will have to base all the nails from cuticle to tip using Supply Source Brush On Resin.

Now apply Supply Source Brush On Resin on the nail plate area one by one on the nails without letting it to flow into the sidewalls or the cuticle area. Repeat the step till you have built up plate to meet the smile line area of the tip.

Now overlay the entire nails one by one with a coat of Supply Source Resin

Now put another coat of Supply Source Resin one by one on all nails. Keep your nails one by one in such a way that they face downwards. Take good amount of French Dip powder and dust it over the wet nails one by one. Let the excess powder fall onto your table towel. To remove excess powder, tap the side of your finger. Repeat the step till you get a strong nail with good arch.

Now spray with Supply Source Activator , after applying a coating of Supply Source Resin on the entire nail one by one and let your nails dry.

Using a file or an electric file, give your nail tips and sides the perfect shape. The surface and the edges are to be refined using a buffer. Now clean the nails with a nylon brush .

Now you can apply the Finito Capping Gel sealant to give your nails a high shine. I reccommend a 36 watt lamp to cure Finito Gel for a period of 1 minute. After the curing of gel, application of cuticle oil is recommended.

If you are a nail tech or beauty professional, compare their prices with the other suppliers. Their guarantee, The Supply Source will match any advertised price" offered by any competitor. Request a full-color nail supply catalog or view it in a PDF format of over 16,000 new products. Feel free to call them today with any your questions, comments and ideas 800-221-8477 or 954-742-9553