Learn About Welding Safety and Welding Info By William Walley At Isnare.com Ezine Articles

Welding is a very difficult and dangerous profession so it is important for each welder to make sure they follow general safety guidelines. In this way, you can insure not only your safety but the safety of others around you.

There are a variety of hazards that a welder will face under the normal performance of their job. Here we list a few of the hazards you may encounter and what you can do to protect yourself.

Electric Shock

Most welders will have to deal with some form of electric shock throughout the time that they weld. Although you can take precautions to keep you as safe as possible, this can happen even when you are careful.

What to do: Make sure that you weld in an area that is free of wet areas and outlets that are faulty. Use gloves where practical when you are using the torch and make sure that you are grounded by standing on rubber or wearing boots that are shock resistant. Do not touch electrical parts, including electrodes, with your bare hands.

Fumes and gases

Most welding by the nature of the way the process works will create noxious gases and toxic fumes. This is something that is necessary for the process to do what it is supposed to do.

What to do: Make sure that the area is well ventilated where you will work and make sure that you weld in an open space. Areas that are confined make it easier to inhale the fumes and gases, which can cause the welder to pass out.

Welding Sparks

Welding sparks are a fire hazard but they are a necessary part of the job because it is the nature of how a welding torch works when it hits metal.

What to do: make sure that you weld in an area that is free of debris or materials that can cause a fire. Keep a fire extinguisher nearby just in case. Wear clothing that is fire retardant, and do not weld around container that had flammable material in them.

Arc Rays

In arc welding, the arc rays can actually burn the welder's eyes and skin if they get near them. It is a good idea to make sure you wear safety equipment for any of these jobs.

What to do: make sure you have a comfortable filter lens and when welding, always use a helmet. Make sure the clothes you wear are fire retardant and that you protect your skin. Also, if you are working around others, make sure you put up a non-flammable shield in the area where you are working.

Hazards in general work area

There can be many hazards in your general work area that you may not be aware of because you may not be conscious of the problem. Make sure the area is clear of clutter.

What to do: clean up the area; make sure any debris or clutter that could catch on fire is removed. Make sure any materials or tools and cables are organized neatly. Make sure your equipment is grounded or insulated well.

Published At: Isnare Free Articles Directory http://www.isnare.com
Permanent Link: http://www.isnare.com/?aid=314342&ca=Automotive

Important Notice DISCLAIMER: All information, content, and data in this article are sole opinions and/or findings of the individual user or organization that registered and submitted this article at Isnare.com without any fee. The article is strictly for educational or entertainment purposes only and should not be used in any way, implemented or applied without consultation from a professional. We at Isnare.com do not, in anyway, contribute or include our own findings, facts and opinions in any articles presented in this site. Publishing this article does not constitute Isnare.com's support or sponsorship for this article. Isnare.com is an article publishing service. Please read our Terms of Service for more information.