How to Fix a Scratch on Your Vehicle’s Paint Job By Brenda Williams At Isnare.com Ezine Articles

There has more than likely been one time or another when you have experienced a scratch on the paint job of your vehicle. Did you know that there are ways that this can be repaired without the costly trip to the dealership or auto body shop? The truth is, sooner or later – every car is going to get a scratch, so – use these tips to get rid of the unsightly marks.

If the car has been painted with enamel paint, than the vehicle repair may need professional attention, if not – than you can go ahead with these simple tips to repair a scratch on the surface of the vehicle.

When repairing a scratch, it is important to lightly wash the surface of any material that would affect the bonding of the paint that is going to be applied to fix the scratch. Sometimes, when vehicles have been waxed, it decreases the ability for the paint to create a bond with the metal, creating an obvious paint line. A mild dish detergent or even a mild laundry detergent can be used to take off any wax, protecting or seal that is on the vehicle and could interrupt the scratch repair process.

Next, you will need to lightly sand the area where the vehicle is scratched with fine grained sand paper. When completing this step, it is most effective to do this by hand. This will ensure that the vehicle will not be over-sanded and damage the body of the vehicle, or even further damage the paint job of the vehicle. Never use an electric sander to repair a small scratch on the body or door of the vehicle; this will lead to unsightly marks being left after the scratch has been repaired. When sanding, go with the direction on the scratch, as this will not make it worse.

If there is rust near the scratch, than it can be easily removed with rust-cleaner and sandpaper treatment. When sanding, only be sure to grind down the area that is closest to the scratch.

Before painting, tape-off the area of the scratch using newspaper, allowing a small cutout for the scratch. This will ensure that only the area required is painted. After all, the paint is more than likely not going to be the exact same tone, unless the vehicle is new and the exact paint is chosen.

How do you choose paint for your vehicle that is being repaired? Often, there is color swatches available from the dealership that the vehicle was purchased from, if not, than at the local auto body supply store there should be a sufficient color. Remember, these colors may not go on completely flush with the current color. The more a vehicle has been exposed to the elements, the more the color fades – making it hard to determine the replacement color.

Next, the area should be sprayed with touch up paint, avoid brushing as it could cause unsightly marks to occur within the paint. Next, remove the paper and let the vehicle dry overnight to ensure it is not going to be effected by the elements.

Published At: Isnare Free Articles Directory http://www.isnare.com
Permanent Link: http://www.isnare.com/?aid=323106&ca=Automotive

Important Notice DISCLAIMER: All information, content, and data in this article are sole opinions and/or findings of the individual user or organization that registered and submitted this article at Isnare.com without any fee. The article is strictly for educational or entertainment purposes only and should not be used in any way, implemented or applied without consultation from a professional. We at Isnare.com do not, in anyway, contribute or include our own findings, facts and opinions in any articles presented in this site. Publishing this article does not constitute Isnare.com's support or sponsorship for this article. Isnare.com is an article publishing service. Please read our Terms of Service for more information.