iSnare.com - Free Content Articles Directory
Authors Contents [Advanced Search][Add OpenSearch][Job Search]
Distribute your articles to thousands of article sites for only $2 and below! Read more...

Index  Business
 

Things to Look For in Parking Lot Lighting Fixtures

 
[ Contact the Author] [ Send to a Friend] [ Article Publisher] [Make PDF] [ Print] [ Bookmark & Share]
 
Read our Terms of Service before reprinting this article. The submitter specified above has claimed the rights to this article.
R. Neal

Parking lot fixture design and manufacture are both very important. Take for example the wide variety of parking lot fixtures that are used to light car dealerships. It is not uncommon to find a diversity of fixture types illuminating vehicles, buildings, and driveway entrances at night. Shoebox fixtures are frequently used as cost savers for dealerships located in coastal areas prone to tropical storms and occasional hurricanes. By fitting a more aerodynamically designed fixture to the top of a light pole, it is often possible to use smaller, less expensive poles to achieve optimal results on a car lot.

This is only one example of how choosing the right parking lot lighting fixtures can play a pivotal role in developing a proposal that exceeds client expectations without exceeding the limits of their budget. The point is not to lock yourself into any one set of preconceptions about which light fixtures will work best in your client’s parking lot until after you have looked at all the other mitigating factors that go into planning and developing a parking lot lighting design.

For instance, if you are lighting a small retail parking lot with a restaurant drive through or an outdoor coffeehouse patio, could it not be just as effective to use a wall-mounted fixture rather than a pole mounted fixture? Many such fixtures not only can add a historical or contemporary decorative element to the walls surrounding a parking lot, but such lights can often house more energy efficient types of lamp that emit a higher level of luminance than your client has had in the past with a significant decrease in electrical usage. In many communities, actual fixture type is dictated by decorative concerns such as those commonly found in homeowners restrictions and historical portions of town. Lighting a parking lot with combination wall mounted and pole mounted fixtures can often fulfill both luminary and regulatory requirements simultaneously.

Of course, any parking lot, large or small, must be lit with security as well as visibility foremost in mind. Any number of flood light fixture types can be used to secure the perimeter of a parking lot by eliminating shadows along walls, behind buildings, and in gaps between storefronts. This may create a challenge for some contractors working in a community with stringent light pollution controls in place. Illuminating your client’s 5,000 square feet of pavement may require using 1,000W Metal Halide Lamps to light the perimeter and entryways and distribute light out and across the pavement. However, if dark sky laws mandate strict light spillage containment, you will need to house these lamps in a variety of housing design options ranging from full to semi-cutoff luminaire build. Otherwise, the light will go into neighboring residences and businesses, or even into the eyes of passing motorists.

In many instances, the degree of cutoff evident in a parking lot light fixture can be coupled with a specific optics type that further allows for energy-savings and lighting regulation compliance. For example, it may not be necessary after all to use floodlights that are all rated at 1000W. You may only need to selectively one or two 1000W, then use lower 400W fixtures arranged at specific angles of lighting incidence to create the desired foot candle plots needed in parking areas, store fronts, and delivery zones.

Calculating how to create this type of “less is more” lot lighting design using fixtures combined with optics, lighting angles, pole heights, and a diversity of mounting options is a task you can assign to an RLLD Commercial Lighting specialist. Using AGi32, our team can create multiple three-dimensional models that will show both you and your client different options to choose from and provide a more streamlined approach to developing a final equipment list that best fits everyone’s budget.

Important NoticeDISCLAIMER: All information, content, and data in this article are sole opinions and/or findings of the individual user or organization that registered and submitted this article at Isnare.com without any fee. The article is strictly for educational or entertainment purposes only and should not be used in any way, implemented or applied without consultation from a professional. We at Isnare.com do not, in anyway, contribute or include our own findings, facts and opinions in any articles presented in this site. Publishing this article does not constitute Isnare.com's support or sponsorship for this article. Isnare.com is an article publishing service. Please read our Terms of Service for more information.

Article Tags: light [See Dictionary], lighting [See Dictionary], parking [See Dictionary]
Got a question about this article? Ask the community!
Article published on November 30, 2008 at Isnare.com
 
Rate this article:

High Bay Lighting For Indoor Warehouses and School and Church Gymnasiums
Submitted by: R. Neal

Contractors installing high bay lights in warehouses and factories can find a wide range of fixture manufacture and lamping options through RLLD Commercial Lighting...

Recessed Commercial Electric Lights
Submitted by: R. Neal

Enhanced illumination contributes to a more positive and focused work environment in the office It helps improve employee morale, and it contributes to increased productivity which can be vital to recession proofing a business...

Commercial Pendant Lighting For Retail Stores, Restaurants, Buildings, Country Clubs & More
Submitted by: R. Neal

Commercial pendant lights give you a broad spectrum of interior design options to pass on to your clients...

Pulse-Start Metal Halide HID Lighting Fixtures
Submitted by: R. Neal

Pulse-start metal halide lamps, fixtures, and ballasts are well worth the initially higher front end costs they present to both you and to your clients...

Low Bay Light Fixtures & Accessories
Submitted by: R. Neal

Low bay light fixtures are primarily used in commercial environment that require superior color rendering and minimum glare...

Industrial Fluorescent Lighting
Submitted by: R. Neal

Recent laws have been passed that require all incandescent lights to be replaced by 2010 Because of this, industrial fluorescent lights are going to play a major role in future lighting design for factories, warehouses, and office parks in need of new architectural area lighting systems...

Outdoor Commercial Lighting Systems
Submitted by: R. Neal

Commercial lighting systems are often much more complicated than they appear at face value A significant number of factors influence the selection of equipment, placement of fixtures, and levels of illumination appropriate to structures, terrain, and activity...

Commercial Vandal Proof Ceiling Mounted Light Fixtures
Submitted by: R. Neal

In areas where accidental impact or deliberate criminal mischief can shatter overhead lights, commercial vandal proof ceiling mount lighting fixtures offer a form of lighting whose higher impact and scratch resistance makes them extremely difficult to break, dislodge, or tamper with...

Dark Sky Lighting Regulations
Submitted by: R. Neal

Dark sky regulations have been created throughout the nation to improve the overall quality of lighting while at the same time controlling its quantity...

Overview of Commercial Light Pole Installation For Parking Lots, Streets & Roadway Lighting Fixtures.
Submitted by: R. Neal

Commercial light pole installation is a systematic process that flows from the conceptual and the general to the systematic and precise...

Industrial & Commercial Exterior Wall Pack Outdoor Lighting Fixtures
Submitted by: R. Neal

Wall packs are compact, commercial lights that mount on the side of the wall of a building A wall pack is made of cast aluminum housing, a ballast compartment, a chamber that contains the lamp, and a glass refractor lens that distributes illumination...

Wall Mounted Lighting Fixtures. Commercial Area, Security, Accent & Area Lighting Wallpack Lights
Submitted by: R. Neal

Wall mounted lights perform three important functions integral to effective outdoor commercial lighting...

Commercial Lighting Supply
Submitted by: R. Neal

RLLD Commercial Lighting offers a comprehensive selection of indoor and outdoor commercial lighting supplies to contractors, builders, architects, and designers...

Compact Fluorescent Lights
Submitted by: R. Neal

Compact fluorescent lamps are designed to replace incandescent lamps and reduce the carbon footprint of a building...

Case Study: Exterior Commercial Lighting Project For Tucson Convenience Store
Submitted by: R. Neal

The client was a convenience store in Tucson, AZ that needed exterior commercial lighting for visibility, parking, and security...

Features of RingCentral Phone Service
Submitted by: Jason Kay

There are so many business owners these days that think just because their company is not a Fortune 500 one that they cannot afford an 800 number, but with the birth of company’s like RingCentral, nothing could be further from the truth...

How To Reduce The Costs Of Running Your At Home Business
Submitted by: Scott Lindsay

Cost cutting measures can be useful at any time, but with costs rising along with stressful economic concerns these measures have never been more prudent...

Presenting a Professional Appearance in Business
Submitted by: Scott Lindsay

The first impression someone gets of your at home business may shape their ongoing relationship with you as a business entity, and no matter how good your product(s) or services are, they may choose not to buy following a bad first impression...

Owning a Business is Hard Work
Submitted by: Brenda Williams

Owning a business is hard work Not only do you have to worry about expenses such as the cost to rent an office, but you also have to worry about how many employees you need, how many you have to absolutely have and then after all of that, how many you can actually afford...

Three Easy Ways to Make Extra Money
Submitted by: Kevin Tyler Smith

Making extra money nowadays is not so hard to do anymore There are a lot of ways on how you can do so, and these would only usually require you minimal effort...

You Have It All, And You Are Still Not Living
Submitted by: Guy & Michele Luminato

Are you one of those people who worked extremely hard by going to college You get that education so you can get that high paying job so you can live the good life...

Shaklee Home Based Business Review
Submitted by: Colon Bolden

Shaklee is a cleaning and nutritional company Dr...

Top Ten Tips for Cheap Business Gas
Submitted by: Nick Heath

There are 11,000 different energy tariffs for small businesses, depending on your supplier, postcode, credit score, consumption, length of contract etc...

4 Areas Local Merchants Must Focus Upon to Outcompete Megastores
Submitted by: Franklin Lucer

Given the current retail environment in which sales have continued to decline, it's natural for independent shop owners to question their ability to compete...

A Bird's Eye View of Digital Signage Software
Submitted by: Franklin Lucer

Think back to the last time you visited a venue in which a digital signage solution had been installed...

How Specialty Retailers Can Uncover Pockets of Hidden Sales
Submitted by: Franklin Lucer

One of the most significant advantages enjoyed by the large discounters and big box merchandisers are their economies of scale...

A Small Retailer's Guide to Succeeding in a Turbulent Economy
Submitted by: Franklin Lucer

The economic turmoil that has gripped the nation continues to deepen and independent shop owners are understandably worried about the future...

A Beginner's Guide to Martin Yale Products
Submitted by: Jeff McRitchie

Martin Yale is a familiar name in the office machine world and with good reason The company manufactures a mind-boggling array of office machines, from paper shredders to laminators, and they're all high-quality machines...

Akiles CoilMac ECI Review
Submitted by: Jeff McRitchie

Perhaps the most popular coil binding systems on the market, the Akiles CoilMac ECI is meant to provide a solution for businesses that aim to do a moderate amount of coil binding, probably for in-house documents and reports...

Akiles Coilmac EPI Review
Submitted by: Jeff McRitchie

A desktop unit that can still produce at high volume, the Akiles Coilmac EPI is an all-electric coil binding system designed for medium to large sized organizations that do a fair amount of binding...

Isnare.com Footer Divider

© 2004-2009. Isnare Free Articles - An Isnare Online Technologies Free Articles Project. All Rights Reserved.   Privacy Policy